'Lunatico' in thread "Equal intervals 2" asks if there is a Wet-Dry regulator in CDP. I'm starting a new topic as this is an important question to raise and of general interest, especially for those new to CDP.
Some CDP processes do have a parameter for the amount of the effect (CROSS, for example), but most do not. You have to add your own WET-DRY control - which is SUBMIX BALANCE (Soundshaper menu: EditMix > MIX > MixBalance).
For example, the process PHASOR with a semitone shift of 1 will probably give quite a pronounced effect. To lessen this, add Mix Balance, with the source as the second input (File 2). (In Soundshaper, click on the source cell to select this.) Within Mix Balance, Balance is the Wet-Dry parameter: a value of zero is fully 'dry' (0% File 2 - Source) and 1 is fully 'wet' (100% File 1 - Phasor).
In Soundshaper the patchgrid shows the process chain: Source - Phasor - MixBalance. In a longer chain, it might still be relevant to choose the original source as Input 2, rather than the previous process. Also in Soundshaper, you you can select a spectral file for either Input 1 or 2, provided the Option Auto-FFT is checked (as it should be by default). It would be useful to have a wet-dry control built in to many processes as an optional parameter and I'm working on ways of doing this within Soundshaper.